Dulux Wood Guard Timbapreservative 1l

APPEARANCE: LOW SHEEN. COLOUR: CLEAR AND A RANGE OF POPULAR NATURAL WOOD FINISHES: MAHOGANY, TEAK, LIGHT OAK AND DARK OAK. TEAK OR DARK OAK IS PREFERRED FOR LIGHT WOODS SUCH AS SA PINE, AND MAHOGANY OR LIGHT OAK FOR DARKER WOODS SUCH AS MERANTI. CLEAR IS A NEUTRAL COLOUR. STANDARD COLOURS AND CLEAR CAN BE INTERMIXED IN ANY PROPORTION TO ACHIEVE DESIRED COLOUR. USERS SHOULD BECOME FAMILIAR WITH THE COLOUR BY PRACTISING ON WELL PREPARED SCRAP TIMBER OF THE SAME TYPE AS IS TO BE TREATED. AS IS TO BE TREATED. BINDER TYPE: SYNTHETIC RESIN, OIL AND WAX. DENSITY AT 23°C: APPROX. 0. 92. PRODUCT INFORMATION: SOLIDS CONTENT: BY WEIGHT: APPROX. 51%, BY VOLUME: APPROX. 46%. PACKAGED VISCOSITY: VISCOSITY AT 23°C: APPROX. 30 - 35 SEC/F4. SPREADING RATE: APPROX. 10M² PER LITRE PER COAT DEPENDING ON SURFACE POROSITY, PROFILE AND APPLICATION METHOD. RECOMMENDED DFT PER COAT: PENETRATES SUBSTRATE. RECOMMENDED WFT PER COAT: PENETRATES SUBSTRATE. FLASH POINT: 37ºC. APPLICATION INFORMATION: MIXING: STIR UNTIL HOMOGENEOUS WITH A FLAT PADDLE. SURFACE CONDITIONS: SURFACE TEMPERATURE BETWEEN 10 - 35°C. RELATIVE HUMIDITY BETWEEN 10 - 85 % OR 2ºC ABOVE DEW POINT MINIMUM. APPLICATION METHODS AND THINNING: BRUSH AND CONVENTIONAL SPRAY. BRUSH: APPLY IN AN EVEN THICKNESS AND FINISH IN THE DIRECTION OF THE GRAIN. THIN THE FIRST COAT 50% WITH MINERAL TURPENTINE TO AID PENETRATION ON RAW WOOD. THIN SECOND COAT 10% FOLLOWED BY THE FINAL COAT UN-THINNED. ALLOW 48 HOURS (2 DAYS) DRYING TIME BETWEEN COATS. CONVENTIONAL SPRAY: THIN UP TO 10% WITH MINERAL TURPENTINE. N. B. THINNING REDUCES VOLUME SOLIDS, THEREFORE MORE COATS WILL BE NEEDED TO PRODUCE THE SAME COLOUR, BUILD, GLOSS AND DURABILITY AS FOR A BRUSH APPLICATION. DRYING TIME: TOUCH DRY 4 HOURS AT 23ºC. RECOATING TIME: 48HOURS AT 23ºC (DRYING TIMES WILL BE EXTENDED DURING COLD, WET OR HUMID CONDITIONS. ) CLEANING OF EQUIPMENT: AFTER USE, REMOVE AS MUCH PRODUCT AS POSSIBLE, AND THEN CLEAN IMMEDIATELY WITH DULUX BRUSH CLEANER DEGREASER OR MINERAL TURPENTINE. SUBSTRATES: SUITABLE FOR APPLICATION TO ALL EXTERIOR DOORS, FASCIA BOARDS, WINDOW FRAMES, FENCES, GARDEN SHED, TRELLIS, GARDEN FURNITURE, GARAGE DOORS, SHUTTERS, AND OTHER WOODEN SURFACES.